Usage Scenarios:
Ideal for stage lighting, mobile DJ rigs, rental systems, architectural lighting, and any venue where running DMX cables is impractical or time-consuming.
Key Details & Functions:
Switchable TX/RX Mode: Dip switch 6 selects emission (ON, green LED) or receipt (OFF, red LED). Mode change requires power reset.
400m Range: Reliable wireless DMX transmission in open areas with 20DBM power.
Dip Switch Configuration:
Switch 1 (code 1-4) – Sets connection address for multiple receipt controllers.
Switch 2 (code 1-5) – Selects working frequency; real-time setting available.
Visual Indicators: DMX signal light (3) and wireless status light (4) with color/flash patterns for easy troubleshooting.
Benefits & Value:
Cost-Effective: Eliminates long DMX cable runs and repeaters.
Multi-Unit Support: One emission controller can connect to multiple receipt controllers with addressable setup.
Easy Troubleshooting: LED flash rate indicates signal strength – slower flash or no flash means adjust antenna or reduce distance.
Proper Installation Note: Antenna must be vertical to the controller for optimal electromagnetic field and signal transfer.
Quick decision guide: Perfect for users needing a simple, switchable wireless DMX solution with dip-switch frequency selection and multi-receiver addressing.
Product advantages
It features a switchable TX/RX design, so one unit serves as either transmitter or receiver via dip switch. With 400m open-area range and 20DBM power, it handles medium to large stages. Ideal for rental houses, DJs, and stagehands needing an affordable, reliable, switchable wireless DMX system.
Packaging
Carton box
Weight - Size
Net Weight: 6.61lbs(1Kg)
Size: 7.87" X7.87" X 5.91" (L20 X W20 X H15)
Product specification
Switchable TX/RX design – One unit serves as transmitter or receiver via dip switch. No need to buy separate devices.
400m open-area range – 20DBM power delivers reliable wireless DMX for medium to large stages.
Multi-receiver addressing – Dip Switch 1 (code 1-4) allows multiple receipt controllers to connect to one transmitter.
Adjustable frequency – Dip Switch 2 (code 1-5) lets you select clean channels to avoid interference
Product display
Feel Free To Contact Us