This professional 8-channel DMX512 signal distributor complies with the DMX512/1990 standard. It features one input and eight independent outputs, each with high voltage protection and complete input-output signal isolation (including signal earth cable). Input/output uses XLR 3-pin connectors. Each channel has a separate signal amplifier system and individual LED indicator. Wide input voltage: AC88–256V, 50/60Hz. Compliant with CE, UL, and GB 7000.15-2000 standards. Dimensions: 314×147×75mm, net weight: 1.5kg.

This 4-way DMX512 signal amplifier is designed for outdoor and harsh environments with an IP65 waterproof rating. It features 1 input and 4 isolated outputs, providing signal amplification, distribution, remote control, and high-voltage circuit isolation. Powered by AC90–240V, 50/60Hz, 6W. Each output supports up to 32 devices (using 128-bit shielded cable). Includes waterproof connectors, tail plug, and wall mounts. Ideal for stage, architectural, and landscape lighting.

This 1-channel waterproof DMX signal repeater operates on 110V–220V power and features an IP67 waterproof rating, making it suitable for outdoor and harsh environment use. It complies with the international DMX protocol, supporting real-time transmission of up to 512 channels of data. The unit offers one input and one output, with electrically isolated signal reshaping and amplification. The input uses a 5-pin waterproof XLR connector, and the interface follows the RS-485 standard. The electrical isolation withstand voltage between input and output is >AC300V. With compact dimensions of 139*53*41mm and a gross weight of 1kg, this repeater is designed to boost DMX signals, filter out interference, and ensure reliable data transmission in demanding conditions.

This DMX splitter is designed for easy installation on any truss position using stickers. It strengthens and amplifies the DMX signal from the controller. The input and output ports use separate power supplies, with each output port featuring a modular design, high-voltage isolation technology, and protection circuitry.

The TP-D8802B is a professional RDM-DMX512 signal splitter built with the international standard RDM (Remote Device Management) protocol for two-way communication. It provides a bidirectional pathway for RDM devices, regenerates and amplifies both RDM and DMX512 data, and expands one input signal into multiple isolated outputs. This significantly increases signal transmission distance, expands the number of fixtures a console can control, and ensures stable, reliable data transmission.

Fully DMX-512(1990) compliant, true RS-485 I/O, 1000VDC isolation between input and outputs and between each output – eliminates ground loops and protects your console. Universal 90–240VAC power supply, and a rugged 1U 19-inch rack mount design. Perfect for stage, bar, and event lighting

This professional 8-channel DMX512 signal amplifier is fully compliant with the DMX-512 (1990) specification. It features true RS-485 rated inputs and outputs, a 3-pin XLR input with passive loop-through, and a configuration switch that allows you to toggle between 8-way or 4-way isolated DMX output modes – supporting two separate signal inputs and outputs. With over 1000VDC isolation between input and outputs, as well as between each output, it effectively eliminates ground loops and protects your main controller. Housed in a rugged 1U 19-inch rack-mount chassis with metal signal sockets, this unit is built for reliable performance in any professional lighting setup.

2.4G Wireless DMX Transmitter & Receiver Dongle – Guangzhou Protocol
This compact wireless dongle supports both transmitting and receiving of DMX signals over a 400-meter controllable distance. Compatible with 99% of China-made LED stage lights (Guangzhou protocol), it is ideal for moving heads, PAR cans, and other wireless-enabled fixtures. Powered by 5V/500mA with AC90-260V input, it comes with EU or US plug options. Built with durable materials for long-term use.

This 2.4GHz Wireless DMX Controller is a signal emission/receipt device that transmits DMX data from a lighting console to fixtures wirelessly. It features two working modes: as a Signal Emission controller (green LED) it receives DMX input from a console and broadcasts the signal; as a Signal Receipt controller (red LED) it receives wireless DMX and outputs wired DMX to fixtures. With a transmission power of 20DBM and 400m open-area range, it operates in the 2.4GHz ISM band (2400–2431MHz). Setup is controlled via two dip switches: Switch 1 (code 1-4) sets connection addresses for multiple receipt units, while Switch 2 (code 1-5) selects working frequency and code 6 toggles between emission (ON) and receipt (OFF). The unit requires a 9V/500mA power input and features an SMA antenna connector.

This 2.4GHz wireless DMX transceiver features a tri-color LED display for clear ID code status indication. With 126 channels and automatic frequency hopping, it delivers high anti-interference capability for reliable operation. Seven selectable ID codes allow up to seven separate wireless networks to operate simultaneously in the same location without crosstalk. Operating in the 2.4GHz ISM band with a receiver sensitivity of -106dBm, it achieves a communication distance of 300 meters in open areas. The unit includes a standard 100mm spiral SMA antenna, with optional high-gain antennas available. Input voltage is AC 88‑256V 50/60Hz, and the DMX signal port uses a 3‑pin connector. Compact in size (15x8x16cm) and lightweight (0.5kg), it complies with CE, UL, and GB 7000.15-2000 standards.

This wireless DMX system adopts the advanced CRMX transceiver technology from the Swedish company Lumen. It is designed for professional lighting control, supporting 512 signals and any number of channels with accurate, fast, and interference-free transmission and automatic error correction. The unit features a 2-in-1 design, allowing users to switch between transmitter and receiver mode via the LCD display button. Housed in a die-cast aluminum enclosure, it is weatherproof, UV-resistant, and reliable for outdoor use. The system supports one-to-one or one-to-many configurations, and multiple transmitter groups can operate simultaneously in the same location with automatic frequency matching. Compliant with CE, UL, and GB7000.15-2000 standards, and must be used in accordance with local radio laws.

Record & play 512 DMX channels standalone. 3 trigger modes: auto (adjustable speed), mic, or audio. 512MB memory – 8 programs, 5+ min each. User mode locks to play only. USB backup. RJ45/RS232 central control. XLR/RJ45 ports. Wide voltage AC88-256V. 1U rackmount. CE/UL.