This wireless DMX system adopts the advanced CRMX transceiver technology from the Swedish company Lumen. It is designed for professional lighting control, supporting 512 signals and any number of channels with accurate, fast, and interference-free transmission and automatic error correction. The unit features a 2-in-1 design, allowing users to switch between transmitter and receiver mode via the LCD display button. Housed in a die-cast aluminum enclosure, it is weatherproof, UV-resistant, and reliable for outdoor use. The system supports one-to-one or one-to-many configurations, and multiple transmitter groups can operate simultaneously in the same location with automatic frequency matching. Compliant with CE, UL, and GB7000.15-2000 standards, and must be used in accordance with local radio laws.

Record & play 512 DMX channels standalone. 3 trigger modes: auto (adjustable speed), mic, or audio. 512MB memory – 8 programs, 5+ min each. User mode locks to play only. USB backup. RJ45/RS232 central control. XLR/RJ45 ports. Wide voltage AC88-256V. 1U rackmount. CE/UL.

This 8-channel DMX512 distribution unit combines wired and 2.4G wireless (300m visible range) signal reception in one 1U rack-mount chassis. Fully compliant with DMX512/1990 standard, it features independent input and output signal lines (including earth cable protection) and a separate signal amplifier system for each channel with individual LED status indicators. Wide input voltage (AC88–256V) ensures stable operation under unstable power conditions. High voltage protection safeguards your lighting console and fixtures from back-feeding damage. Each output supports up to 32 fixtures. Meets CE, UL, and GB 7000.15-2000 standards.

Fully compliant with DMX-512 (1990) specification, this 8-channel isolated splitter features true RS-485 rated inputs and outputs. The 3-pin XLR input includes a passive loop-through for daisy-chaining. Each of the 8 outputs is optically isolated from the input and from each other by 1000VDC, eliminating ground loops, stray voltages, and back-feeding damage. Powered by a universal 90–240VAC supply (15W), the unit is built into a rugged 1U high, 19-inch rack-mount chassis with metal signal sockets. Ideal for permanent installations, touring, and large events where signal integrity and equipment protection are critical.

This compact 8-port node efficiently converts Art-Net protocol into 16 independent DMX512 outputs? (or 8 outputs – adjust based on actual spec). With 4096 total DMX channels, it seamlessly integrates with Tiger, Pearl, and MA lighting consoles. Each port delivers 512 channels, making it ideal for driving large RGB pixel arrays, moving heads, and LED fixtures. Plug-and-play setup via Ethernet ensures low latency and stable show performance. Perfect for touring, fixed installations, and events requiring high channel density without complex daisy-chaining.

*Note: Verify if the device has 8 DMX output ports (8 x 512 = 4096 channels) or 16 ports. Adjust the first sentence accordingly.*

The CR051R is a standard Art-Net node that allows you to use other software, lighting consoles, or Art-Net-compatible controllers to distribute Art-Net data over a network. It supports bi-directional conversion, and the transmission mode can be easily switched via the on-board LCD menu—either Art-Net to DMX512 or DMX512 to Art-Net. The CR051R is commonly used to expand DMX output ports for Tiger Touch or MA2 control consoles.

Package dimensions: 55cm × 22cm × 19cm
Packing weight: 2.5kg

This new 16-channel converter reliably translates Art-Net protocols (I, II, III) into 16 independent DMX512 outputs. Each of the 16 ports delivers 512 channels, supporting up to 16 x 170 RGB pixels. Configure IP, subnet mask, broadcast address, and Universe mapping (Net 0, SubNet 0, Universe 0–15) directly via the onboard LCD menu. The fixed 100Mbps Ethernet port ensures stable signal flow in Art-Net → DMX512 mode. Ideal for large lighting installations, stage rigs, and permanent architectural setups where low latency and high channel counts are essential.

Convert ArtNet (1/2/3) to robust DMX512 with this 1U rack-mount unit. Factory default: 10.201.6.100, broadcast 10.255.255.255, subnet 255.0.0.0. Eight independent DMX ports (Net:0, Sub‑Net:0, Universe 0–7) deliver 8×512 channels or drive 8×170 RGB pixels. 100 Mbps NIC ensures low latency. Perfect for permanent installations, touring, and LED pixel mapping. PC configuration software included.

Input/output:Standard: 8 x XLR Pin socket
Option: 5pin socket is optional (if you need 5pin please tell our sales manager firstly and confirm quantity you need)
8 Port DMX distributor with one input
DMX512/1990 Standard